Installation of Hydraulic Hose:

1.to avoid the hoses to reverse the force to avoid bending.2.to avoid external friction or compression.3.to avoid a sharp turn, bend radius R> 10D (D is tube diameter).4.satisfy the conditions in the length should be as short as possible to avoid the operation of machinery and equipment hose severe deformation occurred.5.do not hose or tubing, and other contacts, to avoid wear and tear.6.the hose should be installed along the contours of the equipment as much as possible parallel.7.the hose should be sufficient distance from heat source, and to have reasonable measures of protection.

The pressure washer is a truly great and simple machine. Using water under high pressure to clean large or difficult surfaces has saved countless man hours. Although most people think of the pump as the pressure washer, it is useless without the hose. Pressure washer hoses enable the operator reach and clean any surface easily without moving the pump itself.Pressure washers are basically large capacity hydraulic pumps. They don't have to deal with the heat or solvents of normal hydraulic machinery, but they are subject to most of the other constraints of hydraulic systems. While the working pressure in most hydraulic washers is relatively low, the peak pressures throughout the machine can be very high. The hoses must therefore be extremely strong and resilient when dealing with that much pressure. They are almost identical in construction to the hydraulic hoses found in other industrial equipment.

A pressure washer nearly always comes with a new hose. If that hose is damaged or cut, the operator is out of work until it is repaired. A simple splice with hose clamps simply will not work. The answer to that problem lies in the nature of the machine. If one thinks of the hose as a hydraulic hose, then taking it to a shop that specializes in the repair of hydraulic hoses is a natural thing to do. Any of these shops, of which there is at least one in any decent-sized town, can perform a swift and inexpensive repair and have the operator back to work quickly.

 

Source: high pressure hose,  stainless steel hose